Issaquah, King County
Booking a chimney inspection in Issaquah is simple. The on-site inspection is $99 plus tax, and it is credited toward the work when you approve the written quote. You get photos and a plain written account of what we found, and whether anything needs doing is your call, made with the evidence in front of you.
What we charge
$99 plus tax
Book an inspection
Book your $99 inspection
$99 plus tax, deducted when you approve the repair
Not sure where to start
Pick what you're seeing at your Issaquah home — we'll point you to the right fix.
What we do
The same crew, the same written quote — for Issaquah homes.
Complete sweep of the flue and firebox, protected by drop cloths and HEPA filtration
Learn more
Restoration of brick, mortar joints and firebox
Learn more
A stainless-steel or ceramic liner run the full height of the flue
Learn more
A stainless cap fitted to your flue's exact dimensions
Learn more
Cleaning of the burner, pilot and valve assembly
Learn more
Crown recast — or rebuilt outright where the damage demands it
Learn moreRanges shown for orientation — the exact figure is written up on-site, after the inspection.
Most Issaquah calls for an inspection start with a question rather than a problem: a house just bought with a fireplace nobody has lit in years, a stove the previous owner installed without paperwork, or a stain on the ceiling near the chimney after a long run of rain. Each one needs a different level of look, and we say at the start which level fits.
Under the Puget Sound Clean Air Agency's rules, a Stage 1 burn ban treats certified and uncertified devices differently: an open fireplace or an uncertified stove or insert has to stay unlit, while a certified one may keep running until a Stage 2 ban is called. Knowing which one you own is the first step to knowing what you can burn in winter.
Under Washington law, a wood or pellet stove lacking federal certification and its label cannot be sold, traded or even given away. If you are buying an Issaquah home with a stove or insert already in place, an inspection that records the label, or its absence, is useful information before closing.
Every chimney inspection we do in Issaquah includes:
Smoke coming back into the room, or a smell that won't go? Book the inspection first.
Book nowTwo things decide most of our findings in this area. The first is water, which reaches a chimney through the crown, the cap and the flashing long before anything shows indoors. The second is the appliance itself: whether an insert or stove is certified shapes how it can be used during a burn ban, and the label is often hidden behind a surround.
Level 1 is the routine yearly look when nothing is changing. Level 2 adds the attic, roof and a camera run, and is the one to choose before a sale, a relining or an appliance swap.
We open the damper, check the firebox and smoke chamber, and read the appliance label if there is one, since certification status matters under local burn rules.
On the roof we look at the crown, the cap, the mortar joints and the flashing where the chimney meets the shingles, which is where rain usually gets in.
You receive photos and a written summary, plus a quote if something needs work. The on-site inspection is $99 plus tax, and it is credited toward the work when you approve the written quote.
What this work is quoted at for Issaquah homes — the exact figure comes from the $99 on-site inspection, credited toward the work.
| Service | Price in Issaquah | What that covers |
|---|---|---|
| Chimney Inspection | $99 plus tax | Level 1 visual; Level 2 adds a full camera scan |
| Chimney Sweep | $189–$449 | Full flue swept, Level 1 inspection included |
| Chimney Relining | From $1,895 | Full-length stainless liner, sized to the appliance |
| Chimney Repair | From $425 | Masonry repair — brick and mortar, scoped after diagnosis |
| Chimney Cap Installation | $235–$845 | Stainless cap fitted; multi-flue and custom at the top |
Ranges are what these jobs are quoted at in Issaquah. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.
Monthly climate data put Issaquah's rainfall above Bellevue's, with November the wettest month in both. The regional climate record for western Washington also notes that rain falls harder on windward slopes than in the valleys, which is consistent with the higher totals recorded here.
Water, not fire, is what wears out most masonry chimneys, in the view of the Chimney Safety Institute of America. That is why a large part of our inspection happens outside: a crown with no overhang, a missing cap or lifted flashing are the usual ways in, and each shows up in the photos you receive.
Issaquah is a city nestled against the Issaquah Alps, with a historic downtown plus large newer developments in the highlands. We work every part of it — Gilman, Issaquah Highlands, Squak Valley included.
IssaquahKing County, WA · 47.530, -122.033
Before and after
Illustrations of what each repair changes on a typical chimney — not photos of a specific job.
Before
After
Before
After
Before
After
Four steps, each one on paper — so you always know what happens next.
Choose a genuine opening on the crew's calendar. Confirmation is immediate.
Liner, crown, cap, flashing and masonry examined in order — each finding photographed.
One document, plain numbers, covering only the work your chimney genuinely needs.
The repair is completed, then handed over with before-and-after photos of every item.
The on-site inspection is $99 plus tax, and it is credited toward the work when you approve the written quote. If you decide not to go ahead, you keep the photos and findings.
No Washington rule we could find makes one mandatory when you sell. Chimney industry guidance does call for a Level 2 at a change of ownership, and buyers often request it.
The national fire code standard for chimneys, NFPA 211, says once a year, whether or not you use the fireplace much.
A $99 on-site inspection, a written quote before any work, and photos of every item we touch.
