Bellevue & the Eastside, WA
Chimney sweeping and cleaning in Bellevue, $189–$449 — we remove the soot and creosote that build up every burning season and cause chimney fires, Level 1 check included.
Our price
$189–$449
Book an inspection
Book your $99 inspection
$99 plus tax, deducted when you approve the repair
Not sure where to start
Pick what you're seeing — we'll point you to the right fix.
What we do
Sweeping, inspection, relining and masonry — one local crew for the whole chimney.
Chimney inspection in Bellevue for $99 plus tax — a CSIA-style inspection catches cracks, blockages and liner damage before they become a fire or carbon-monoxide hazard.
Learn more
Chimney sweeping and cleaning in Bellevue, $189–$449 — we remove the soot and creosote that build up every burning season and cause chimney fires, Level 1 check included.
Learn more
Chimney repair in Bellevue from $425 — firebox rebuilds, mortar and brick repair; we fix the structural problems that let water and heat into your home.
Learn more
A new stainless-steel or cast liner restores a safe, code-compliant flue when the old liner is cracked, corroded or undersized.
Learn more
Chimney cap installation in Bellevue for $235–$845 including the cap. Stainless steel keeps rain, animals and embers out of your flue — the cheapest insurance against expensive water damage.
Learn more
Annual gas-fireplace service keeps your unit burning safely and efficiently and catches gas or venting issues early.
Learn moreRanges shown for orientation — the exact figure is written up on-site, after the inspection.
For Bellevue homes, a clean chimney isn't just about efficiency; it's about essential safety. Throughout the damp, chilly Pacific Northwest burning season, soot and highly flammable creosote naturally accumulate within your flue, impeding proper draft and creating a fire hazard. Our expert chimney sweeps thoroughly clear this dangerous buildup, inspecting your flue, damper, and firebox as part of the process. We provide transparent before-and-after photos, ensuring you can confidently enjoy your fireplace, knowing it's clean and safe.
Many exquisite homes along Lake Washington or closer to the Eastside waterfront remain vacant for stretches. This dormancy, combined with our persistent moisture, creates ideal conditions for animal nesting and accelerated creosote accumulation. A thorough pre-season sweep is vital to clear these hazards.
Both leading safety organizations like the CSIA and most insurance providers strongly advise an annual chimney sweep for any fireplace or wood-burning stove used during our long, wet winters. This proactive service remains the most critical step you can take to avert a chimney fire.
Each time you enjoy a cozy fire in your Bellevue home, a highly flammable, tar-like byproduct called creosote coats the interior of your flue. As this residue accumulates, it transforms into the primary fuel for devastating chimney fires. Furthermore, a constricted flue can force hazardous smoke and carbon monoxide — an odorless, colorless gas — back into your living space. The National Fire Protection Association (NFPA) Standard 211 mandates annual chimney inspections and cleaning as necessary, solidifying the annual sweep as the fundamental safeguard for any wood-burning system.
How it works
We lay drop cloths and connect HEPA control so your home stays spotless.
Flue, smoke chamber, damper and firebox are brushed and vacuumed clean.
A Level 1 visual inspection flags cracks, blockages or buildup.
You get before/after photos and a clear summary — no pressure, no upsell.
Licensed& insured Washington chimney contractor
5 communitiesOn the Eastside, King County
$99 plus taxInspection, credited toward an approved quote
Every jobDocumented with before-and-after photos
If any of these sound familiar, book the $99 plus tax inspection — credited toward the work if you approve the quote:
By town
The 5 Eastside communities we serve. Pick yours for local scheduling and the chimney issues we see there.
Before and after
Illustrations of what each repair changes on a typical chimney — not photos of a specific job.
Before
After
Before
After
Before
After
Four steps, each one on paper — so you always know what happens next.
Choose a genuine opening on the crew's calendar. Confirmation is immediate.
Liner, crown, cap, flashing and masonry examined in order — each finding photographed.
One document, plain numbers, covering only the work your chimney genuinely needs.
The repair is completed, then handed over with before-and-after photos of every item.
Before you let anyone in
Every fact below is one you can check yourself before we ever set foot on your roof.
The on-site inspection is $99 plus tax, and it is credited toward the work when you approve the written quote. Booking online asks for no card.
You get the price in writing, for the work your chimney actually needs, and nothing starts until you have approved it.
Each item we inspect or repair is photographed before and after, so the condition of your chimney is on record.
Call (425) 380-8866 — a local Eastside number, the same one on every page of this site.
Licensed& insured Washington chimney contractor
5 communitiesOn the Eastside, King County
$99 plus taxInspection, credited toward an approved quote
Every jobDocumented with before-and-after photos
Serving Bellevue, Mercer Island, Medina, Clyde Hill & Issaquah
For those enjoying their fireplaces regularly in Bellevue, an annual sweep is essential, ideally before the initial chill of autumn sets in. Factors like frequent use, burning softwoods, or unseasoned logs might necessitate an additional mid-season cleaning.
In Bellevue, a comprehensive chimney sweep combined with a Level 1 visual inspection generally falls within the lower hundreds of dollars. The final price can vary based on factors like challenging access or significant creosote accumulation. We always provide a precise, transparent quote before any work begins, so there are no hidden costs.
Typically, a complete chimney sweep takes our technicians between 45 to 90 minutes. The exact duration depends on your specific chimney system and the extent of creosote or soot buildup.
Absolutely not. We pride ourselves on maintaining the pristine condition of your Bellevue home. Our team uses extensive drop cloths and advanced HEPA filtration vacuums to meticulously contain all soot and debris, ensuring your living space remains spotless.
Telltale signs include a persistent, strong smoky odor (especially noticeable in our humid climate), a noticeable downdraft, soot flaking into your firebox, or the appearance of shiny, tar-like residues on your flue walls. If you observe any of these, it's definitely time for a cleaning.
Heavy (Stage 3) creosote is glazed, hardened and highly flammable — it needs professional removal, not a basic sweep.
Learn moreChimney inspection in Bellevue for $99 plus tax — a CSIA-style inspection catches cracks, blockages and liner damage before they become a fire or carbon-monoxide hazard.
Learn moreA new stainless-steel or cast liner restores a safe, code-compliant flue when the old liner is cracked, corroded or undersized.
Learn more| Service | Price in Bellevue | What that covers |
|---|---|---|
| Chimney Sweep | $189–$449 | Full flue swept, Level 1 inspection included |
| Creosote Removal | From $245 | Priced by creosote stage — glazed stage 3 is the heavy end |
| Chimney Inspection | $99 plus tax | Level 1 visual; Level 2 adds a full camera scan |
| Chimney Relining | From $1,895 | Full-length stainless liner, sized to the appliance |
Ranges are what these jobs are quoted at in Bellevue. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.
Licensed local crews, a $99 on-site inspection credited toward repairs, and a written quote before any work. Book a real open slot on our calendar.
