Bellevue & the Eastside, WA
A breathable waterproof sealant stops rain from soaking into your masonry while letting trapped moisture escape.
Our price
$285–$795
Book an inspection
Book your $99 inspection
$99 plus tax, deducted when you approve the repair
Not sure where to start
Pick what you're seeing — we'll point you to the right fix.
What we do
Sweeping, inspection, relining and masonry — one local crew for the whole chimney.
Chimney inspection in Bellevue for $99 plus tax — a CSIA-style inspection catches cracks, blockages and liner damage before they become a fire or carbon-monoxide hazard.
Learn more
Chimney sweeping and cleaning in Bellevue, $189–$449 — we remove the soot and creosote that build up every burning season and cause chimney fires, Level 1 check included.
Learn more
Chimney repair in Bellevue from $425 — firebox rebuilds, mortar and brick repair; we fix the structural problems that let water and heat into your home.
Learn more
A new stainless-steel or cast liner restores a safe, code-compliant flue when the old liner is cracked, corroded or undersized.
Learn more
Chimney cap installation in Bellevue for $235–$845 including the cap. Stainless steel keeps rain, animals and embers out of your flue — the cheapest insurance against expensive water damage.
Learn more
Annual gas-fireplace service keeps your unit burning safely and efficiently and catches gas or venting issues early.
Learn moreRanges shown for orientation — the exact figure is written up on-site, after the inspection.
Given the nature of brick and mortar, they are inherently porous materials. This means that with every Bellevue rainfall, water is driven deep into your chimney’s masonry. Our region's characteristic cold winters then freeze this absorbed water, causing it to expand and ultimately fracture the brick and mortar—a destructive process known as spalling. Our vapor-permeable waterproofing sealant creates an effective barrier, preventing water intrusion while still allowing the masonry to breathe and release trapped moisture. This service is a remarkably cost-effective, swift, and highly recommended method for safeguarding a structurally sound chimney for many years against the PNW elements.
The relentless, pervasive dampness characteristic of the Pacific Northwest climate makes waterproofing an exceptionally prudent investment for any Bellevue chimney, maximizing its longevity and integrity against the elements.
Because brick is naturally porous, every downpour in Bellevue forces water deep into the masonry. Unsealed, this trapped moisture is then subjected to our winter freeze-thaw cycles, leading directly to destructive spalling.
Brick and mortar are engineered to be porous, meaning every significant rainstorm in Bellevue inevitably drives water into the heart of your chimney's masonry. During our distinctive PNW winters, this absorbed water freezes, expands, and actively fractures the surface—this relentless freeze-thaw cycle is the root cause of the vast majority of spalling damage. Applying a high-quality, vapor-permeable water repellent effectively prevents rain from soaking into the material while crucially allowing any existing trapped moisture to escape. This proactive measure significantly extends the life of sound masonry, halting its progressive deterioration season after season.
How it works
We clean the masonry and pre-treat any small cracks or joints.
A breathable sealant is applied over the full chimney exterior.
The masonry repels water but still releases trapped moisture.
Photos document full, even coverage.
Licensed& insured Washington chimney contractor
5 communitiesOn the Eastside, King County
$99 plus taxInspection, credited toward an approved quote
Every jobDocumented with before-and-after photos
If any of these sound familiar, book the $99 plus tax inspection — credited toward the work if you approve the quote:
By town
The 5 Eastside communities we serve. Pick yours for local scheduling and the chimney issues we see there.
Before and after
Illustrations of what each repair changes on a typical chimney — not photos of a specific job.
Before
After
Before
After
Before
After
Four steps, each one on paper — so you always know what happens next.
Choose a genuine opening on the crew's calendar. Confirmation is immediate.
Liner, crown, cap, flashing and masonry examined in order — each finding photographed.
One document, plain numbers, covering only the work your chimney genuinely needs.
The repair is completed, then handed over with before-and-after photos of every item.
Before you let anyone in
Every fact below is one you can check yourself before we ever set foot on your roof.
The on-site inspection is $99 plus tax, and it is credited toward the work when you approve the written quote. Booking online asks for no card.
You get the price in writing, for the work your chimney actually needs, and nothing starts until you have approved it.
Each item we inspect or repair is photographed before and after, so the condition of your chimney is on record.
Call (425) 380-8866 — a local Eastside number, the same one on every page of this site.
Licensed& insured Washington chimney contractor
5 communitiesOn the Eastside, King County
$99 plus taxInspection, credited toward an approved quote
Every jobDocumented with before-and-after photos
Serving Bellevue, Mercer Island, Medina, Clyde Hill & Issaquah
For most Bellevue homes, waterproofing every 3 to 5 years is a good guideline. However, in areas with particularly heavy wet-season exposure, where rain and humidity are constant, you might consider reapplying sooner.
Absolutely not. We exclusively utilize advanced vapor-permeable products specifically designed to block external rain penetration while simultaneously allowing any existing, trapped moisture within the masonry to escape naturally. This 'breathable' quality is crucial for the long-term health of your Bellevue chimney.
Chimney waterproofing is genuinely one of the most budget-friendly preventative services available, and it's considerably less expensive than the extensive repairs needed to fix the spalling damage it effectively prevents. We'll provide you with a clear, upfront cost estimate.
If your chimney's masonry is currently in good, sound condition, then unequivocally yes. Waterproofing is a highly valuable investment that actively prevents the freeze-thaw water damage so common in Bellevue, which otherwise leads to costly repointing and full structural rebuilds.
For minor cracks and joints, we conduct a specialized pre-treatment before applying the sealant. However, any significant structural damage must first be properly repaired to ensure the waterproofing is effective and provides lasting protection for your Bellevue chimney.
See chimney waterproofing pricing in detailMore chimney questions
Chimney sweeping and cleaning in Bellevue, $189–$449 — we remove the soot and creosote that build up every burning season and cause chimney fires, Level 1 check included.
Learn moreChimney inspection in Bellevue for $99 plus tax — a CSIA-style inspection catches cracks, blockages and liner damage before they become a fire or carbon-monoxide hazard.
Learn moreA new stainless-steel or cast liner restores a safe, code-compliant flue when the old liner is cracked, corroded or undersized.
Learn more| Service | Price in Bellevue | What that covers |
|---|---|---|
| Chimney Waterproofing | $285–$795 | Breathable sealer — reapplied every 3–5 years in this climate |
| Chimney Sweep | $189–$449 | Full flue swept, Level 1 inspection included |
| Chimney Inspection | $99 plus tax | Level 1 visual; Level 2 adds a full camera scan |
| Chimney Relining | From $1,895 | Full-length stainless liner, sized to the appliance |
Ranges are what these jobs are quoted at in Bellevue. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.
Licensed local crews, a $99 on-site inspection credited toward repairs, and a written quote before any work. Book a real open slot on our calendar.
