Bellevue & the Eastside, WA
Chimney cap installation in Bellevue for $235–$845 including the cap. Stainless steel keeps rain, animals and embers out of your flue — the cheapest insurance against expensive water damage.
Our price
$235–$845
Book an inspection
Book your $99 inspection
$99 plus tax, deducted when you approve the repair
Not sure where to start
Pick what you're seeing — we'll point you to the right fix.
What we do
Sweeping, inspection, relining and masonry — one local crew for the whole chimney.
Chimney inspection in Bellevue for $99 plus tax — a CSIA-style inspection catches cracks, blockages and liner damage before they become a fire or carbon-monoxide hazard.
Learn more
Chimney sweeping and cleaning in Bellevue, $189–$449 — we remove the soot and creosote that build up every burning season and cause chimney fires, Level 1 check included.
Learn more
Chimney repair in Bellevue from $425 — firebox rebuilds, mortar and brick repair; we fix the structural problems that let water and heat into your home.
Learn more
A new stainless-steel or cast liner restores a safe, code-compliant flue when the old liner is cracked, corroded or undersized.
Learn more
Chimney cap installation in Bellevue for $235–$845 including the cap. Stainless steel keeps rain, animals and embers out of your flue — the cheapest insurance against expensive water damage.
Learn more
Annual gas-fireplace service keeps your unit burning safely and efficiently and catches gas or venting issues early.
Learn moreRanges shown for orientation — the exact figure is written up on-site, after the inspection.
Often overlooked, your chimney cap plays an incredibly critical role: it’s the primary defense against our relentless PNW rain and snow, bothersome birds, agile squirrels, and potentially dangerous stray embers entering your flue. An absent or damaged cap is, unequivocally, the leading cause of costly water damage and persistent animal intrusions in charming Eastside homes. We provide precise measurement for your flue, then install durable, corrosion-resistant stainless-steel caps—available for single or multi-flue systems—complete with animal-guard mesh and robust hardware engineered to withstand Bellevue’s unique climate challenges.
Bellevue's waterfront properties, exposed to amplified wind-driven rain from Lake Washington, demand a meticulously sealed, highly corrosion-resistant chimney cap. This is an absolute essential for preventing premature damage and maintaining safety in such unique, exposed locations.
For Bellevue homes, an exposed or absent chimney cap is the singular most frequent culprit behind extensive chimney water damage and unwelcome animal nesting, making it an essential, yet often underestimated, component.
An uncapped flue in a Bellevue home acts as an open gateway for persistent PNW rain, winter snow, curious birds, and agile squirrels. It also creates a direct pathway for stray embers to escape and potentially ignite your roof. Water infiltration through an uncapped flue leads to rusted dampers, saturated masonry, and a significantly shortened liner lifespan. Furthermore, animal nests can dangerously obstruct the flue, forcing deadly carbon monoxide back into your living space. A properly installed chimney cap, complete with a spark-arrestor screen, effectively addresses all these risks simultaneously, offering comprehensive protection.
How it works
We size your single or multi-flue opening exactly.
Stainless cap with mesh and spark arrestor, matched to your chimney.
Fitted and fastened to stay put through Pacific Northwest wind.
Photos verify a clean, weather-tight fit.
Licensed& insured Washington chimney contractor
5 communitiesOn the Eastside, King County
$99 plus taxInspection, credited toward an approved quote
Every jobDocumented with before-and-after photos
If any of these sound familiar, book the $99 plus tax inspection — credited toward the work if you approve the quote:
By town
The 5 Eastside communities we serve. Pick yours for local scheduling and the chimney issues we see there.
Before and after
Illustrations of what each repair changes on a typical chimney — not photos of a specific job.
Before
After
Before
After
Before
After
Four steps, each one on paper — so you always know what happens next.
Choose a genuine opening on the crew's calendar. Confirmation is immediate.
Liner, crown, cap, flashing and masonry examined in order — each finding photographed.
One document, plain numbers, covering only the work your chimney genuinely needs.
The repair is completed, then handed over with before-and-after photos of every item.
Before you let anyone in
Every fact below is one you can check yourself before we ever set foot on your roof.
The on-site inspection is $99 plus tax, and it is credited toward the work when you approve the written quote. Booking online asks for no card.
You get the price in writing, for the work your chimney actually needs, and nothing starts until you have approved it.
Each item we inspect or repair is photographed before and after, so the condition of your chimney is on record.
Call (425) 380-8866 — a local Eastside number, the same one on every page of this site.
Licensed& insured Washington chimney contractor
5 communitiesOn the Eastside, King County
$99 plus taxInspection, credited toward an approved quote
Every jobDocumented with before-and-after photos
Serving Bellevue, Mercer Island, Medina, Clyde Hill & Issaquah
Primarily, a chimney cap acts as a crucial barrier, preventing our persistent PNW rain, birds, debris, and unwanted animals from entering your flue. Additionally, it effectively contains sparks, stopping them from landing on your roof and potentially causing a fire hazard.
Installing a single-flue stainless steel cap is typically one of the most economical yet impactful upgrades for a Bellevue chimney. Multi-flue or custom-fabricated caps will naturally incur a higher cost. We always provide a transparent, upfront price before any installation takes place.
Absolutely. Chimney caps come in a variety of sizes and configurations. We meticulously measure your specific flue opening to ensure a perfect fit, whether it's a single or multi-flue system, guaranteeing an optimal, watertight seal.
Yes, definitively. Every cap we install comes equipped with durable animal-guard mesh, specifically designed to deter common pests like birds, squirrels, and raccoons from gaining access to your chimney and nesting within.
High-quality stainless steel chimney caps are engineered for exceptional longevity, reliably performing for many decades, even when exposed to Bellevue's consistently wet and challenging climate conditions.
See chimney cap installation pricing in detailMore chimney questions
Chimney repair in Bellevue from $425 — firebox rebuilds, mortar and brick repair; we fix the structural problems that let water and heat into your home.
Learn more
Crown rebuilds, tuckpointing and repointing restore the masonry that protects your chimney from the top down.
Learn more
Flashing seals the joint between your chimney and roof — when it fails, water runs straight into your ceilings and walls.
Learn more| Service | Price in Bellevue | What that covers |
|---|---|---|
| Chimney Cap Installation | $235–$845 | Stainless cap fitted; multi-flue and custom at the top |
| Chimney Repair | From $425 | Masonry repair — brick and mortar, scoped after diagnosis |
| Masonry Repair (Crown / Repointing) | From $475 | Crown work, repointing and tuckpointing by surface area |
| Chimney Flashing Repair | $329–$1,495 | Reseal at the low end, full flashing replacement at the high |
Ranges are what these jobs are quoted at in Bellevue. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.
Licensed local crews, a $99 on-site inspection credited toward repairs, and a written quote before any work. Book a real open slot on our calendar.
