Bellevue & the Eastside, WA
Annual gas-fireplace service keeps your unit burning safely and efficiently and catches gas or venting issues early.
Our price
$169–$475
Book an inspection
Book your $99 inspection
$99 plus tax, deducted when you approve the repair
Not sure where to start
Pick what you're seeing — we'll point you to the right fix.
What we do
Sweeping, inspection, relining and masonry — one local crew for the whole chimney.
Chimney inspection in Bellevue for $99 plus tax — a CSIA-style inspection catches cracks, blockages and liner damage before they become a fire or carbon-monoxide hazard.
Learn more
Chimney sweeping and cleaning in Bellevue, $189–$449 — we remove the soot and creosote that build up every burning season and cause chimney fires, Level 1 check included.
Learn more
Chimney repair in Bellevue from $425 — firebox rebuilds, mortar and brick repair; we fix the structural problems that let water and heat into your home.
Learn more
A new stainless-steel or cast liner restores a safe, code-compliant flue when the old liner is cracked, corroded or undersized.
Learn more
Chimney cap installation in Bellevue for $235–$845 including the cap. Stainless steel keeps rain, animals and embers out of your flue — the cheapest insurance against expensive water damage.
Learn more
Annual gas-fireplace service keeps your unit burning safely and efficiently and catches gas or venting issues early.
Learn moreRanges shown for orientation — the exact figure is written up on-site, after the inspection.
While gas fireplaces offer wonderful convenience for upscale Eastside homes, they are definitively low-maintenance, not zero-maintenance. Over the course of a year, the accumulation of dust, spiderwebs, wear on pilot components, and subtle venting issues can lead to frustrating ignition problems, diminished flame quality, and—most critically—a potential carbon monoxide hazard. Our annual tune-up meticulously cleans the burner, pilot, and valve assembly, thoroughly inspects the venting system, and verifies safe carbon monoxide levels, ensuring your gas fireplace operates cleanly, reliably, and safely throughout the Pacific Northwest heating season.
The persistent dampness characteristic of the Pacific Northwest climate accelerates corrosion on delicate burner assemblies and venting components. Consequently, gas fireplaces in Bellevue's waterfront homes particularly benefit from diligent annual servicing to maintain optimal safety and performance.
Even modern gas fireplaces in Bellevue require annual attention. Over time, accumulated dust, spiderwebs, and minor venting anomalies can lead to frustrating pilot ignition failures, reduced efficiency, and—most importantly—a serious carbon monoxide risk.
Although gas fireplaces are renowned for their clean-burning nature, they are not exempt from the need for regular maintenance. Over a year of use in a Bellevue home, microscopic dust, fine spider webs, and general wear on critical components can accumulate on the burner and pilot assembly. Simultaneously, the venting system can subtly loosen or develop partial blockages. Any of these issues can manifest as frustrating no-light scenarios, unexpected sooting, or, most concerningly, a silent carbon monoxide hazard. An annual professional service, which crucially includes a comprehensive CO and venting check, is the single most effective preventive measure to detect and address these potential dangers long before they ever become a threat within your living space.
How it works
We check the burner, pilot, valve, venting and ignition.
Burner, pilot, glass and logset are cleaned for a clean flame.
Venting and a carbon-monoxide check confirm safe operation.
We adjust for efficiency and reliable startup all season.
Licensed& insured Washington chimney contractor
5 communitiesOn the Eastside, King County
$99 plus taxInspection, credited toward an approved quote
Every jobDocumented with before-and-after photos
If any of these sound familiar, book the $99 plus tax inspection — credited toward the work if you approve the quote:
By town
The 5 Eastside communities we serve. Pick yours for local scheduling and the chimney issues we see there.
Before and after
Illustrations of what each repair changes on a typical chimney — not photos of a specific job.
Before
After
Before
After
Before
After
Four steps, each one on paper — so you always know what happens next.
Choose a genuine opening on the crew's calendar. Confirmation is immediate.
Liner, crown, cap, flashing and masonry examined in order — each finding photographed.
One document, plain numbers, covering only the work your chimney genuinely needs.
The repair is completed, then handed over with before-and-after photos of every item.
Before you let anyone in
Every fact below is one you can check yourself before we ever set foot on your roof.
The on-site inspection is $99 plus tax, and it is credited toward the work when you approve the written quote. Booking online asks for no card.
You get the price in writing, for the work your chimney actually needs, and nothing starts until you have approved it.
Each item we inspect or repair is photographed before and after, so the condition of your chimney is on record.
Call (425) 380-8866 — a local Eastside number, the same one on every page of this site.
Licensed& insured Washington chimney contractor
5 communitiesOn the Eastside, King County
$99 plus taxInspection, credited toward an approved quote
Every jobDocumented with before-and-after photos
Serving Bellevue, Mercer Island, Medina, Clyde Hill & Issaquah
Absolutely. An annual professional tune-up is vital for ensuring your gas fireplace in Bellevue operates safely, efficiently, and reliably. It's the most proactive step you can take to identify and address any potential venting or insidious carbon monoxide issues early on.
In most cases, yes, we can. The majority of 'no-light' problems in gas fireplaces across Bellevue stem from common issues such as a dirty pilot light, a malfunctioning thermocouple, or a valve problem. Our technicians are adept at diagnosing and servicing all these components.
An annual gas fireplace tune-up for your Bellevue home is a modestly priced preventive service. Any necessary replacement parts are an additional cost, but we will always provide a clear, upfront quote for those before proceeding with any work.
Ideally, your gas fireplace should be serviced once a year, preferably before the onset of the primary heating season. This ensures it remains both safe and highly efficient throughout the colder months.
Yes, a gas fireplace that is poorly maintained or has a blocked venting system absolutely can produce dangerous carbon monoxide. This is precisely why our comprehensive annual service always includes a thorough CO and venting inspection, safeguarding your Bellevue home.
See gas fireplace service pricing in detailMore chimney questions
Chimney sweeping and cleaning in Bellevue, $189–$449 — we remove the soot and creosote that build up every burning season and cause chimney fires, Level 1 check included.
Learn moreChimney inspection in Bellevue for $99 plus tax — a CSIA-style inspection catches cracks, blockages and liner damage before they become a fire or carbon-monoxide hazard.
Learn moreA new stainless-steel or cast liner restores a safe, code-compliant flue when the old liner is cracked, corroded or undersized.
Learn more| Service | Price in Bellevue | What that covers |
|---|---|---|
| Gas Fireplace Service | $169–$475 | Annual service and tune-up; repairs quoted after diagnosis |
| Chimney Sweep | $189–$449 | Full flue swept, Level 1 inspection included |
| Chimney Inspection | $99 plus tax | Level 1 visual; Level 2 adds a full camera scan |
| Chimney Relining | From $1,895 | Full-length stainless liner, sized to the appliance |
Ranges are what these jobs are quoted at in Bellevue. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.
Licensed local crews, a $99 on-site inspection credited toward repairs, and a written quote before any work. Book a real open slot on our calendar.
