Clyde Hill, King County
Air duct cleaning in Clyde Hill starts at $525, and the final price depends mainly on how many supply and return vents the house has and how the ductwork is laid out. We put the system under negative pressure with a vacuum at the trunk, agitate each run from its register, and show you before-and-after images from inside the ducts.
Typical investment
From $525
Book an inspection
Book your $99 inspection
$99 plus tax, deducted when you approve the repair
Not sure where to start
Pick what you're seeing at your Clyde Hill home — we'll point you to the right fix.
What we do
The same crew, the same written quote — for Clyde Hill homes.
Level 1 or Level 2 inspection, with a camera scan where warranted
Learn more
Complete sweep of the flue and firebox, protected by drop cloths and HEPA filtration
Learn more
Restoration of brick, mortar joints and firebox
Learn more
A stainless-steel or ceramic liner run the full height of the flue
Learn more
A stainless cap fitted to your flue's exact dimensions
Learn more
Cleaning of the burner, pilot and valve assembly
Learn moreRanges shown for orientation — the exact figure is written up on-site, after the inspection.
Clyde Hill homes are detached houses on large lots, with a 20,000-square-foot minimum written into the town's zoning, and the heating systems follow each house's own history. One home may have its original ductwork in a crawl space, another a system replaced during a remodel with runs in the attic, and a third a mix of both. Before quoting, we count the registers and look at where the trunk lines run, because that is what sets the time on site.
Every air duct cleaning we do in Clyde Hill includes:
Smoke coming back into the room, or a smell that won't go? Book the inspection first.
Book nowOwners usually call us after something changed: a renovation that put drywall dust through every register, a new furnace installed on old ducts, pets, or a house bought from someone else with no idea when the system was last cleaned. In each case the goal is the same, to remove what has settled in the runs rather than just wiping the grilles, and to point out any disconnected or damaged section we find along the way.
We count the vents, find the trunk lines and the furnace access, and confirm the price from our grid before starting.
Registers are covered to keep the system under negative pressure, and the vacuum is connected at the main trunk.
Each branch is agitated with brushes or air whips so the debris travels back to the vacuum instead of into the room.
Covers go back on clean, and you receive the images plus a note on any loose joint or crushed run we saw.
What this work is quoted at for Clyde Hill homes — the exact figure comes from the $99 on-site inspection, credited toward the work.
| Service | Price in Clyde Hill | What that covers |
|---|---|---|
| Air Duct Cleaning | From $525 | Whole HVAC system — trunks, branches and every register |
| Chimney Sweep | $189–$449 | Full flue swept, Level 1 inspection included |
| Chimney Inspection | $99 plus tax | Level 1 visual; Level 2 adds a full camera scan |
| Chimney Relining | From $1,895 | Full-length stainless liner, sized to the appliance |
| Chimney Repair | From $425 | Masonry repair — brick and mortar, scoped after diagnosis |
Ranges are what these jobs are quoted at in Clyde Hill. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.
Clyde Hill is a small, affluent residential city on the high ground just north of downtown Bellevue, with large single-family estate homes.
Clyde HillKing County, WA · 47.632, -122.218
Before and after
Illustrations of what each repair changes on a typical chimney — not photos of a specific job.
Before
After
Before
After
Before
After
Four steps, each one on paper — so you always know what happens next.
Choose a genuine opening on the crew's calendar. Confirmation is immediate.
Liner, crown, cap, flashing and masonry examined in order — each finding photographed.
One document, plain numbers, covering only the work your chimney genuinely needs.
The repair is completed, then handed over with before-and-after photos of every item.
From $525. A typical single-family house often lands in the $700 to $900 range on our grid; more registers, longer runs or hard-to-reach trunks move the figure up, and you see it before work starts.
Most houses take several hours. We give you a time estimate once we have counted the vents during the walk-through.
We clear the ducts and the accessible return and supply plenums. Servicing the furnace itself is a job for your heating contractor, and we tell you if anything we see suggests calling one.
It is one of the best times. Construction dust settles deep in the runs, and the system spreads it every time it starts until it is removed.
A $99 on-site inspection, a written quote before any work, and photos of every item we touch.
